WalthersMainline

Revolutionize freight service with WalthersMainline SD60 diesels. Based on mid-production EMD units built with safety cabs fitted with a three-piece windshield and designated as SD60M for modified, these heavy-haulers are still going strong for many original owners and shortlines. Ready for service on your railroad, check out the many features including: Limited edition - one time run of these roadnumbers! Prototypes in service 1989 to the present in main line and regional service Mid-production safety cab with three-piece windshield Open grating on steps With ESU Sound & DCC for DCC & DC layouts featuring: 4 Function outputs with brightness control by CV Fully DCC Compatible 14, 28, 128 Speedsteps Dual Mode DC/DCC 4 Air Horns changeable by CVs 2 Bells Changeable by CVs Full 8 Notch Prime Mover Sounds Compressor Dynamic Brake Multiple realistic lighting effects 21-pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die-cast metal chassis Constant & directional LED headlights Updated shell with molded drill starter points for grab irons in EMD SD60M Diesel Detail Kit (#910-257) sold separately RP-25 metal wheels Proto MAX(TM) metal knuckle couplers PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders. Alternate Horns and Bells include: Horns: CV163 = Nathan K3LA (default) CV163 = Nathan P3 CV163 = Leslie RS3L CV163 = Nathan K5LA CV163 = Nathan P5 Bells: CV164 = Steel Air Bell (default) CV164 = Graham White E-Bell Click here for additional information on DCC functions: ESU CV ListESU Function MappingESU Function Output

Read more less

$0.00 Pre-Order | Estimated delivery Fall 2024Guaranteed Pre-Order Due Date: May 30, 2024   Bring big power to your HO railroad with the WalthersMainline SD75M! Built from 1995 to 1996 at the request of the Santa Fe for a higher horsepower unit (4300 versus 4000 for a standard SD70), most were later transferred to the new Burlington Northern & Santa Fe Railway following the 1995 merger, where many are still in service with BNSF. These units were built with the wide North American Safety Cab, thus the "M" (for "modified") in the model designation. Other features include: One time run of these roadnumbers, order now - limited quantity available! Correct North American Safety Cab per prototype Flush radiators per early production units Correct HTCR-1a or HTCR-1b trucks per prototype Brass Nathan K5 air horn Treadplate detail on walkways Minimum radius 18" (22" or larger recommended) Fully assembled LED Lighting includes: 21-Pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die cast metal chassis Cab interior 5000-gallon fuel tank w/road specific details Standard bell on conductor's side Molded drill starter points for grab irons - easily added with SD70-Series Diesel Detail Kit (910-261, sold separately) Correct size RP-25 metal wheels Proto MAX(TM) magnetic metal knuckle couplers  Road-specific details on this model include: Low headlight HTCR-1a trucks Nose door with window  More Information Item # 11004 Brand WalthersMainline Scale HO Type EMD SD75M Engine Electronics Standard DC Road Name BNSF Railway Road Number 8275 MSRP $169.98

Read more less

$0.00 Pre-Order | Estimated delivery Fall 2024Guaranteed Pre-Order Due Date: May 30, 2024   Bring big power to your HO railroad with the WalthersMainline SD75M! Built from 1995 to 1996 at the request of the Santa Fe for a higher horsepower unit (4300 versus 4000 for a standard SD70), most were later transferred to the new Burlington Northern & Santa Fe Railway following the 1995 merger, where many are still in service with BNSF. These units were built with the wide North American Safety Cab, thus the "M" (for "modified") in the model designation. Other features include: One time run of these roadnumbers, order now - limited quantity available! Correct North American Safety Cab per prototype Flush radiators per early production units Correct HTCR-1a or HTCR-1b trucks per prototype Brass Nathan K5 air horn Treadplate detail on walkways Minimum radius 18" (22" or larger recommended) Fully assembled LED Lighting includes: 21-Pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die cast metal chassis Cab interior 5000-gallon fuel tank w/road specific details Standard bell on conductor's side Molded drill starter points for grab irons - easily added with SD70-Series Diesel Detail Kit (910-261, sold separately) Correct size RP-25 metal wheels Proto MAX(TM) magnetic metal knuckle couplers  Road-specific details on this model include: Low headlight HTCR-1a trucks Nose door with window  More Information Item # 11003 Brand WalthersMainline Scale HO Type EMD SD75M Engine Electronics Standard DC Road Name BNSF Railway Road Number 8268 MSRP $169.98

Read more less

$0.00 Pre-Order | Estimated delivery Fall 2024Guaranteed Pre-Order Due Date: May 30, 2024   Bring big power to your HO railroad with the WalthersMainline SD75M! Built from 1995 to 1996 at the request of the Santa Fe for a higher horsepower unit (4300 versus 4000 for a standard SD70), most were later transferred to the new Burlington Northern & Santa Fe Railway following the 1995 merger, where many are still in service for BNSF. These units were built with the wide North American Safety Cab, thus the "M" (for "modified") in the model designation. Other features include: One time run of these roadnumbers, order now - limited quantity available! Correct North American Safety Cab per prototype Flush radiators per early production units Correct HTCR-1a or HTCR-1b trucks per prototype Brass Nathan K5 air horn Treadplate detail on walkways Minimum radius 18" (22" or larger recommended) Fully assembled LED Lighting includes: High or low headlight per prototype Improved, working front ditch lights Constant and directional lights Available with ESU Sound & DCC for DCC or DC powered layouts with: Four air horns changeable by CVs: K5LAR24 P5R24 K3LA2 K3L 2 Bells changeable by CVs: Graham E-bell Steel Bell 21-Pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die cast metal chassis Cab interior 5000-gallon fuel tank w/road specific details Standard bell on conductor's side Molded drill starter points for grab irons - easily added with SD70-Series Diesel Detail Kit (910-261, sold separately) Correct size RP-25 metal wheels Proto MAX(TM) magnetic metal knuckle couplers  PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders. Road-specific details on this model include: Low headlight HTCR-1a trucks Nose door with window  More Information Item # 21004 Brand WalthersMainline Scale HO Type EMD SD75M Engine Electronics Sound & DCC Road Name BNSF Railway Road Number 8255 MSRP $229.98

Read more less

$0.00 Pre-Order | Estimated delivery Fall 2024Guaranteed Pre-Order Due Date: May 30, 2024   Bring big power to your HO railroad with the WalthersMainline SD75M! Built from 1995 to 1996 at the request of the Santa Fe for a higher horsepower unit (4300 versus 4000 for a standard SD70), most were later transferred to the new Burlington Northern & Santa Fe Railway following the 1995 merger, where many are still in service for BNSF. These units were built with the wide North American Safety Cab, thus the "M" (for "modified") in the model designation. Other features include: One time run of these roadnumbers, order now - limited quantity available! Correct North American Safety Cab per prototype Flush radiators per early production units Correct HTCR-1a or HTCR-1b trucks per prototype Brass Nathan K5 air horn Treadplate detail on walkways Minimum radius 18" (22" or larger recommended) Fully assembled LED Lighting includes: High or low headlight per prototype Improved, working front ditch lights Constant and directional lights Available with ESU Sound & DCC for DCC or DC powered layouts with: Four air horns changeable by CVs: K5LAR24 P5R24 K3LA2 K3L 2 Bells changeable by CVs: Graham E-bell Steel Bell 21-Pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die cast metal chassis Cab interior 5000-gallon fuel tank w/road specific details Standard bell on conductor's side Molded drill starter points for grab irons - easily added with SD70-Series Diesel Detail Kit (910-261, sold separately) Correct size RP-25 metal wheels Proto MAX(TM) magnetic metal knuckle couplers  PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders. Road-specific details on this model include: Low headlight HTCR-1a trucks Nose door with window  More Information Item # 21003 Brand WalthersMainline Scale HO Type EMD SD75M Engine Electronics Sound & DCC Road Name BNSF Railway Road Number 8252 MSRP $229.98

Read more less

$0.00 Pre-Order | Estimated delivery Fall 2024Guaranteed Pre-Order Due Date: May 30, 2024   Bring big power to your HO railroad with the WalthersMainline SD75M! Built from 1995 to 1996 at the request of the Santa Fe for a higher horsepower unit (4300 versus 4000 for a standard SD70), most were later transferred to the new Burlington Northern & Santa Fe Railway following the 1995 merger, where many are still in service with BNSF. These units were built with the wide North American Safety Cab, thus the "M" (for "modified") in the model designation. Other features include: One time run of these roadnumbers, order now - limited quantity available! Correct North American Safety Cab per prototype Flush radiators per early production units Correct HTCR-1a or HTCR-1b trucks per prototype Brass Nathan K5 air horn Treadplate detail on walkways Minimum radius 18" (22" or larger recommended) Fully assembled LED Lighting includes: 21-Pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die cast metal chassis Cab interior 5000-gallon fuel tank w/road specific details Standard bell on conductor's side Molded drill starter points for grab irons - easily added with SD70-Series Diesel Detail Kit (910-261, sold separately) Correct size RP-25 metal wheels Proto MAX(TM) magnetic metal knuckle couplers  Road-specific details on this model include: High headlight HTCR-1a trucks Nose door with window  More Information Item # 11002 Brand WalthersMainline Scale HO Type EMD SD75M Engine Electronics Standard DC Road Name Santa Fe Road Number 222 MSRP $169.98

Read more less

$0.00 Pre-Order | Estimated delivery Fall 2024Guaranteed Pre-Order Due Date: May 30, 2024   Bring big power to your HO railroad with the WalthersMainline SD75M! Built from 1995 to 1996 at the request of the Santa Fe for a higher horsepower unit (4300 versus 4000 for a standard SD70), most were later transferred to the new Burlington Northern & Santa Fe Railway following the 1995 merger, where many are still in service with BNSF. These units were built with the wide North American Safety Cab, thus the "M" (for "modified") in the model designation. Other features include: One time run of these roadnumbers, order now - limited quantity available! Correct North American Safety Cab per prototype Flush radiators per early production units Correct HTCR-1a or HTCR-1b trucks per prototype Brass Nathan K5 air horn Treadplate detail on walkways Minimum radius 18" (22" or larger recommended) Fully assembled LED Lighting includes: 21-Pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die cast metal chassis Cab interior 5000-gallon fuel tank w/road specific details Standard bell on conductor's side Molded drill starter points for grab irons - easily added with SD70-Series Diesel Detail Kit (910-261, sold separately) Correct size RP-25 metal wheels Proto MAX(TM) magnetic metal knuckle couplers  Road-specific details on this model include: High headlight HTCR-1a trucks Nose door with window  More Information Item # 11001 Brand WalthersMainline Scale HO Type EMD SD75M Engine Electronics Standard DC Road Name Santa Fe Road Number 203 MSRP $169.98

Read more less

$0.00 Pre-Order | Estimated delivery Fall 2024Guaranteed Pre-Order Due Date: May 30, 2024   Bring big power to your HO railroad with the WalthersMainline SD75M! Built from 1995 to 1996 at the request of the Santa Fe for a higher horsepower unit (4300 versus 4000 for a standard SD70), most were later transferred to the new Burlington Northern & Santa Fe Railway following the 1995 merger, where many are still in service for BNSF. These units were built with the wide North American Safety Cab, thus the "M" (for "modified") in the model designation. Other features include: One time run of these roadnumbers, order now - limited quantity available! Correct North American Safety Cab per prototype Flush radiators per early production units Correct HTCR-1a or HTCR-1b trucks per prototype Brass Nathan K5 air horn Treadplate detail on walkways Minimum radius 18" (22" or larger recommended) Fully assembled LED Lighting includes: High or low headlight per prototype Improved, working front ditch lights Constant and directional lights Available with ESU Sound & DCC for DCC or DC powered layouts with: Four air horns changeable by CVs: K5LAR24 P5R24 K3LA2 K3L 2 Bells changeable by CVs: Graham E-bell Steel Bell 21-Pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die cast metal chassis Cab interior 5000-gallon fuel tank w/road specific details Standard bell on conductor's side Molded drill starter points for grab irons - easily added with SD70-Series Diesel Detail Kit (910-261, sold separately) Correct size RP-25 metal wheels Proto MAX(TM) magnetic metal knuckle couplers  PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders. Road-specific details on this model include: High headlight HTCR-1a trucks Nose door with window  More Information Item # 21001 Brand WalthersMainline Scale HO Type EMD SD75M Engine Electronics Sound & DCC Road Name Santa Fe Road Number 202 MSRP $229.98

Read more less

$0.00 Pre-Order | Estimated delivery Fall 2024Guaranteed Pre-Order Due Date: May 30, 2024   Bring big power to your HO railroad with the WalthersMainline SD75M! Built from 1995 to 1996 at the request of the Santa Fe for a higher horsepower unit (4300 versus 4000 for a standard SD70), most were later transferred to the new Burlington Northern & Santa Fe Railway following the 1995 merger, where many are still in service for BNSF. These units were built with the wide North American Safety Cab, thus the "M" (for "modified") in the model designation. Other features include: One time run of these roadnumbers, order now - limited quantity available! Correct North American Safety Cab per prototype Flush radiators per early production units Correct HTCR-1a or HTCR-1b trucks per prototype Brass Nathan K5 air horn Treadplate detail on walkways Minimum radius 18" (22" or larger recommended) Fully assembled LED Lighting includes: High or low headlight per prototype Improved, working front ditch lights Constant and directional lights Available with ESU Sound & DCC for DCC or DC powered layouts with: Four air horns changeable by CVs: K5LAR24 P5R24 K3LA2 K3L 2 Bells changeable by CVs: Graham E-bell Steel Bell 21-Pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die cast metal chassis Cab interior 5000-gallon fuel tank w/road specific details Standard bell on conductor's side Molded drill starter points for grab irons - easily added with SD70-Series Diesel Detail Kit (910-261, sold separately) Correct size RP-25 metal wheels Proto MAX(TM) magnetic metal knuckle couplers  PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders. Road-specific details on this model include: High headlight HTCR-1a trucks Nose door with window  More Information Item # 21002 Brand WalthersMainline Scale HO Type EMD SD75M Engine Electronics Sound & DCC Road Name Santa Fe Road Number 209 MSRP $229.98

Read more less

Power your favorite regional commuter trains in style with a WalthersMainline F40PH on the job! Built especially for passenger duties, the prototypes entered service in 1976 and many are still going strong today. Based on Phase 2b prototypes, the models feature: One time run of these roadnumbers, order now - limited quantity available Factory-installed vertical hand rails Molded drill starter points for grab irons (sold separately) RP-25 metal wheels Proto MAX(TM) metal knuckle couplers Fully assembled 21mtc connector Same powerful drive as WalthersProto(R) locos featuring: - Five-pole skew-wound motor - 14:1 gear ratio - Helical-cut gears for quiet operation and easy multiple unit operation - All-wheel drive and electrical pickup - Heavy die-cast metal chassis - Constant and directional LED lights  More Information Item # 910-9480 Brand WalthersMainline Scale HO Type EMD F40PH Engine Electronics DC / DCC Ready Road Name Grand Canyon Railway Road Number 4124 MSRP $159.98

Read more less

Available for Special Order only - Ships as soon as product arrives!Special Orders are not guaranteed to be available; order may be cancelled.Estimated Arrival Time: 5-8 Business Days. Bring trailer-on-flatcar (TOFC) service to your HO railroad with this authentic version of the General Steel Castings (GSC) Piggyback Service Flatcar! Typical of existing flat cars many railroads converted for this traffic in the mid-1950s, features of these WalthersMainline models include: One-time run of these roadnumbers, order now - limited quantity available! NEW - Die cast metal body for excellent performance empty or loaded Used for piggyback service from 1955 to 1980s Factory-installed original style trailer hitch, rub rails and bridge plates Detailed body and deck Add loads in minutes with SceneMaster(TM) 35' (949-2400-series) and 40' Trailmobile (949-2500 series) Trailer 2-Packs sold separately Correct 33" turned-metal RP-25 wheelsets Proto MAX(TM) magnetic metal knuckle couplers More Information Item # 910-50518 Brand WalthersMainline Scale HO Type 53' GSC Piggyback Service Flatcar Road Name Trailer Train TTX Road Number 475242 Release Date Q1 2024

Read more less

Available for Special Order only - Ships as soon as product arrives!Special Orders are not guaranteed to be available; order may be cancelled.Estimated Arrival Time: 5-8 Business Days. Bring trailer-on-flatcar (TOFC) service to your HO railroad with this authentic version of the General Steel Castings (GSC) Piggyback Service Flatcar! Typical of existing flat cars many railroads converted for this traffic in the mid-1950s, features of these WalthersMainline models include: One-time run of these roadnumbers, order now - limited quantity available! NEW - Die cast metal body for excellent performance empty or loaded Used for piggyback service from 1955 to 1980s Factory-installed original style trailer hitch, rub rails and bridge plates Detailed body and deck Add loads in minutes with SceneMaster(TM) 35' (949-2400-series) and 40' Trailmobile (949-2500 series) Trailer 2-Packs sold separately Correct 33" turned-metal RP-25 wheelsets Proto MAX(TM) magnetic metal knuckle couplers More Information Item # 910-50517 Brand WalthersMainline Scale HO Type 53' GSC Piggyback Service Flatcar Road Name Trailer Train TTX Road Number 475160 Estimated Release Date Q1 2024

Read more less